Stock machines, show room machines and used machines

Equipment

• Extended sheet support table
• Milled grooves every 10 mm along the table, parallel to the blades
• All-steel blades double-edged
• Fine adjustment screws for material with less thickness 0.5 mm
• Blade opening 10/85
• Adjustable right and left angle gauge with scale
• Foot switch 1-pedal with protective cover
• Anchor plates incl. dowels
• Obligatory CE safety package

Accessories

• NC – Positioning gauge Classic Cut
  Sheet support, pneumatically controlled, material to the front, incl. sheet shute
  rear guarding via cover
• LED cutting edge illumination
• Pneumatic hold-down device

Equipment

• Extended sheet support table
• Milled grooves every 10 mm along the table, parallel to the blades
• Hold-down device with hard rubber strip to protect polished sheets
• All-steel blades double-edged
• Blade opening 10/85
• Manual back gauge 500 mm
• Adjustable right and left angle gauge with scale
• Selector switch for single and continuous stroke
• Foot switch 1-pedal with protective cover
• Anchor plates incl. dowels

Standard equipment

• NC positioning gauge Cut Control, gauge length 6 – 750 mm
• Bilateral drive
• Pneumatially controlled sheet support with sheet separator (material to the front), max. 750 mm
• All-steel blade, double-edged
• Obligatory CE safety package: rear guarding via 2-beam light barrier incl. side protection grid
• Foot switch
• Anchor plates incl. dowels

Optional equipment:

• Closed table
• Support plate with steel balls
• Linear guide at the front for movable table support arms
• Extended angle gauge 1000 mm (right) with scale incl. lateral flip gauge on linear guide
• Motorized blade gap adjustment
• Cutting edge illumination LED
• Pneumatic hold-down device

Standard equipment

• NC positioning gauge Classic Cut, Touch-control on turnable panel, gauge length 6-750 mm
• Bilateral drives
• Sheet support, pneumatically controlled to the back, gauge length up to 1000 mm, sheet support table width max. 750 mm
• Pneumatcally controlled sheet support to the front with sheet shute max. 750 mm
• Obligatory CE safety package: rear guarding via 3-beam light barrier incl. side protection grid
• Foot switch

Optional equipment

• Blades designed for stainless steel instead of standard blades
• Back gauge 750 mm with ball screws
• Extended angle gauge right with electron. length measurement system, fine adjustment and lateral flip gauge on linear guide 1000 mm
• Closed table
• Sheet support table with steel balls
• Linear guide at the front for movable table support arms
• 2 movable support amrs for linear guide incl. T-slot and scale 1000 mm
• Motorized blade gap adjustment
• Cutting edge illumination LED
• Pneumatic hold-down device

Equipment

• Quick rotating clamping beam with sharp blade and goat’s foot blade for narrow bendings
• Folding blade 15 mm
• Easy to disassemble and transport
• Quick clamping beam
• Sheet support and back gauge system 500 mm
• Cutting device incl. guide rail for max. sheet thickness 0.8 mm 1.0037
• Stand with 4 castors: 2 fixed and 2 steering castors, lockable
• Bending angle indicator right

Equipment

• Sharp-nose blade 20°, exchangeable
• Folding blade 15 mm, exchangeable
• Folding beam with crowning device
• Folding beam adjustment for radius blades
• Clamping beam with counterbalance adjustment
• Quick clamping beam with one-hand operation
• Back gauge and sheet support system 750 mm
• Cutting device incl. guide rail für max. sheet thickness 0.8 mm 1.0037 (S235JR, St37)
• Removable stand with 4 castors:  2 fixed- 2 steering castors, lockable
• Bending angle indicator

Equipment

• Patentented quick clamping device for quck change of clamping and folding beam tools
• Multi-stage clamping beam drive for four different tool heights
• Combi-folding blade, 120 x 12/15 mm, free space 77 mm segmented incl. corner parts
• Bottom beam blade, free space 55 mm, segmented incl. corner parts
• Segmentation of tools: 2x 75 mm (corner parts) 30/50/70/100/150/200/300 mm
• Clamping beam with tool storage function
• Stand with depositing plate incl. tool storage function
• Adjustable angle gauge and bending angle indicator
• Foot pedal for opening and closing of clamping beam
• Machine with 4 castors: 2 fixed and 2 steering castors

Accessories:

• 2 variable gauge arms 600 mm with scale, movable on linear guide incl. 2 tipping gauges
• Add. price for folding- and bottom beam blade surface-hardened (recommended for stainless steel applications)

• Fastrak with hydraulic drive
• Software control CFP 120 on swivelling arm, 12″ colour LCD-touchscreen display
• Crowning device automatic
• MAV 72 1 axis motorized drive in front, adjustment range 6 – 200 mm
• Sheet support table at the bottom beam with steel balls
• Goat’s foot tool h = 120 mm