PDC
Overview
The motorized guillotine PDC is a stronger version of the MHSU line. The sturdier and stiffened table and frame design as well as the “Duo-Cut” drive with two motors offer a considerably improved cutting capacity.
Details
- Manual back gauge 750 mm, adjustable from the front, with digital readout
- Hold-down device with hard rubber rail to protect polished sheets
- Manual blade gap adjustment, two sides
- Extended angle gauge, right, with T-slot and scale 1,000 mm
- All-steel blade, double-edged
- 2 sheet supports with T-slot and scale 1,000 mm
(3 support arms with a working length of 4000 mm) - Table with exchangeable stainless steel plates with recessed grips
- Selector switch for single and continuous stroke
- From 2000 mm: with bilateral drive
- Footswitch
- Anchor plates incl. dowels
- Obligatory safety package in accordance with CE:
Rear guarding with 3-beam light barrier incl. side protection grid
Technische Daten
| type | capacity | working length | cutting angle | number of strokes | drive power |
| [mm] | [mm] | [°] | [pro min.] | [kW] | |
| 1500×4,5 | 4,50 | 1530 | 2,85 | 34 | 1×7,5 |
| 2000×4,0 | 4,00 | 2030 | 2,5 | 34 | 2×4,0 |
| 2500×3,5 | 3,50 | 2530 | 2,0 | 34 | 2×4,0 |
| 3200×3,0 | 3,00 | 3230 | 1,6 | 34 | 2×4,0 |
| 4000×2,5 | 2,50 | 4080 | 1,3 | 34 | 2×4,0 |
Options
Options
- Blades designed for stainless steel, instead of standard blades
- Manual back gauge 1000 mm, adjustable from the front with digital readout
- NC positioning control Classic Cut, touch display, motorized back gauge 750 mm or 1000 mm
- Longlife bearing system
- Back gauge with ball screw spindles
- Sheet support, pneumatically controlled (material to the front) incl. sheet shute 750 mm
- Sheet support, pneumatically controlled (material to the front) for gauge extension max. 1000 mm
- Sheet support, pneumatically controlled (material to the back) sheet support table width max. 750 mm
- Closed table, support plate and support arms with ball rollers
- Sheet support arm for closed table with ball rollers, T-slot and scale
- Extended angle gauge (right or left) with T-slot and scale
- Tipping gauge for insertion in T-slot
- Extended angle gauge (right or left) with scale incl. lateral flip gauge on linear guide
- Extended angle gauge (right or left) with electronic lenght measurement system, fine adjustment and lateral flip gauge on linear guide
- Adjustable angle guage with scale division 0 – 180°
- Linear guide at the front for movable table support arms (without support arms)
- Movable support arm for linear guide, at the front, incl. T-slot and scale
- Motorized blade gap adjustment (only in combination with positioning gauge Classic Cut)
- LED cutting edge illumination
- Pneumatic hold-down device
- Stroke counter
- Sheet stacking cart, for back
- Sheet stacking cart, for front (only in combination with working height 950 mm and shortened sheet shute)
- Working height 950 mm
- Shortened sheet shute
